Club Repeaters, CHIRP Files & Radio Programming Guide
Official VHF/UHF repeater frequencies, PL tones, and status for Pittsburg County — plus ready-to-import CHIRP CSV files, frequency database links, and step-by-step instructions to program repeaters into almost any radio.
PCARC Repeaters, Simplex & Local Weather Frequencies
Filter by band, copy any repeater's specs in one click, or check the channels you want and export your own custom CHIRP-ready .csv file below.
| RX Freq / TX Input | Offset | PL Tone (CTCSS) | CHIRP Tag & Description | Location & Grid | Status | Quick Copy |
|---|
PCARC APRS Digipeaters (144.390 MHz Packet)
CHIRP Downloads & Links to Frequencies
Import our ready-made PCARC .csv files directly into CHIRP (File → Import), or explore trusted statewide databases for travel and regional repeaters.
PCARC Active Repeaters + Calling & NOAA CSV
Includes all 5 active W5CUQ repeaters (McAlester, Daisy, and Stuart on 2m & 70cm), 2m/70cm national simplex calling channels, APRS (144.390), and McAlester NOAA Weather Radio (162.475 WXL49, set to RX-only & scan-skip).
Full PCARC All-Sites Codeplug CSV
Includes every channel from the Active Pack plus the 3 currently offline/maintenance sites (Enterprise 147.105, Stuart UHF 443.725, and McAlester Secondary UHF 444.975) so your radio is pre-programmed the moment they return to service.
CHIRP Software & Frequency Resources
CHIRP-next Official Download
Free open-source radio programming software for Windows, macOS, and Linux. Always download directly from chirpmyradio.com (avoid third-party download sites).
RepeaterBook — Oklahoma
Browse Oklahoma VHF/UHF repeaters by county, highway, or city — or query it directly inside CHIRP via Radio → Query Source → RepeaterBook.
Oklahoma DMR & Digital Repeaters
Explore DMR, Yaesu System Fusion (YSF), and D-STAR repeaters across Oklahoma on RepeaterBook for digital HTs and hotspots.
Oklahoma Repeater Society (ORSI)
The official frequency coordination organization for Oklahoma amateur radio repeaters, band plans, and regional coordination info.
RadioReference — Oklahoma
Public safety, Emergency Management, fire, and rail frequencies for receive-only monitoring. Always set Duplex = off in CHIRP so your radio cannot transmit on them.
NOAA Weather & ARRL Band Plan
McAlester NOAA Weather Radio is 162.475 MHz (WXL49). View all 7 US NOAA frequencies and official ARRL simplex & repeater band plans.
Step-by-Step: How to Program Repeaters Into Most Radios
Every analog FM amateur radio uses the exact same 4 settings to reach a repeater. Learn those 4 pieces first, then pick your radio brand below for exact button-by-button instructions.
Output (RX) Frequency
The published frequency you tune to and listen on. For our primary McAlester repeater, that is 145.370 MHz.
Offset & Direction (+/-)
When you press PTT, your radio shifts to the repeater's input frequency: standard 2m is ±0.600 MHz and 70cm is ±5.000 MHz.
PL / CTCSS Tone (Encode)
A sub-audible tone your radio transmits so the repeater opens its receiver (e.g. 114.8 Hz). Set Transmit Tone (TONE / T-CTCS) and leave Receive Tone OFF.
Mode: Wide FM (25 kHz)
Amateur VHF/UHF voice repeaters use standard FM (Wide / 25 kHz) — never Narrow FM (NFM), which makes your audio sound whisper-quiet.
Choose Your Programming Method or Radio Brand:
Troubleshooting: "Why Can't I Hit the Repeater?"
Nearly every first-time programming issue comes down to one of these six quick checks:
You Hear It, But Can't Key It Up
Check that your PL Tone matches the table (114.8 Hz on 2m) and is set on Transmit (T-CTCS / TONE) — not Receive only! Also verify the offset direction (- vs +).
Baofeng Isn't Shifting on Transmit
On UV-5R / UV-82 models programmed by keypad, you must delete the old slot (Menu 28 DEL-CH), save RX, then press *SCAN (Reverse) and save TX to the same slot.
People Say Your Audio Is Quiet
Your channel bandwidth is probably set to Narrow FM (NFM / 12.5 kHz). Switch it to Wide FM (FM / 25 kHz) and speak 2–3 inches across the microphone.
No Audio Heard (Even When Busy Light Flashes)
You accidentally enabled Receive Tone Squelch (R-CTCS / TSQL) with a mismatched tone. Turn Receive Tone OFF and set Squelch (SQL) to level 1–3.
CHIRP Fails to Clone / Connect
Push the K1 2-pin plug firmly into the radio until fully seated, turn radio volume up to ~50%, check your COM port in Device Manager, and use an FTDI programming cable.
Weak Signal or Static Indoors
VHF/UHF signals are line-of-sight and drop sharply indoors. Step outside, hold the antenna vertical, or upgrade from a stock stubby antenna to a 15–19" whip or mobile mag-mount.